- I know this type of question has been asked here but id like to explain my issue. Power Mac G5 has been sitting on the shelf ...
- I have the same issue with my 2008 macbook pro a1260. I've replaced the adapter - no luck. shorting the power jumpers on the ...
This worked perfectly for a couple of my IBM Lenovo R61s. It was spot on except in step 3 you need to remove both screws by the red circles in order to the get inside bezel off, for the R61 anyway. Thanks for the great tutorial!
Very easy to follow. Replacing the HDD on these unibodies is super easy. Thanks for the guide.
This guide was awesome. I used JerseyJeepGurl'
s suggestion and used an egg carton, numbering each cavity as a step in the guide. So for a step that had me remove 3 different kinds of screws, I had a cavity for each, numbered: 1a, 1b, 1c and wrote a,b,c on the guide itself next to each bullet point in the step. It was awesome.
I guess that before starting I overlooked what a T6 torx actually was. I started this process at 8pm and realized right away that I did not have a set that small and of course all stores were closing. Lowes actually had an awesome fine torx driver set for only 7 bucks!
So that you fixit.