Completed Guides

Notes

  • iPod Nano 1st Generation Battery & Logic Board Replacement

    You can leave out this steps with disconnecting the two cables.

    Without disconnecting the two cables, one can separate the two pieces only 1/2 inch. This is enough to work carefully with the soldering iron and change the battery.

    It's a little bit difficult to work with the needle to open the three holes after removing the old battery - but you can do it.

    From the reading of the other notes it seems to me easier than to disconnect the two cables

  • iPod 5th Generation (Video) Case Replacement

    I changed the battery yesterday and left out the steps 7 - 9. It's not really necessary to seperate front and back completety.

    So you can't break the brown tab. :-)