Hello my fellow ifixit community. I have a question which perplexes me. I have an original 8gb iPhone. I just updated the fir...

I was wondering, what the cheapest, fastest, and most effective way to opening up the Original iPhone without bending the hou...

Yes, i have tried to put this iPhone in DFU mode. This is how i am able to jailbreak it on 3.0. I also tried to put 3.1.3 but it would not go though. I also updated to the latest version of iTunes. Still no good.

I would say open it, since they are one of the easiest iPod ever created to open and check to see if the battery is connected securely to its' port. Since you hear clicking sound, that's the harddrive, but it doesn't sound like anything is wrong on that part. You may just need a new battery. Let me know how it goes.

Well, lets start off by saying good that you did your research on the item. And if my answer is correct, please let me know. When you open your iPhone 3g(www.ifixit.com will show you how) and pull off you your entice display enclosure, you will see the Cable dock flex cable. Disconnect this from your logic board and make sure to unscrew the necessary screw. What you have is a combination of three part that you have just taken out because they are all connected. First was the dock connector flex cable with the left speaker attached. Second is the sound buzzer/bottom speaker en-closer. It's all black and not that big. On the bottom of that, which is the third part (as well as the part you are looking for)if your antenna flew cable. This is the part you want to replace. Now if you think if you can just buy this item and replace it, your right but wrong. There is metal prong that is connect from the antenna flex cable to the buzzer. The buzzer is also connect to the dock flex cable. In simple terms, you want to b...

Yes there is. You have two separate speaker on your iphone. One is the iphone speaker buzzer which is connect to your antenna. The other speaker is connected to your sync flex cable inside your phone. If your phone still syncs and you don't hear any sound from BOTH of you speakers, you need to replace that entire part. But if you just have one speaker working, you can open it and figure exactly what wrong. the speaker on the right side is connected to the sync cable. the speaker on the left side is connected to the speaker/buzzer part. If you are not handy and you want it simply for you, just purchase the entire part. If you can not find the item on this website, you can find it on ebay. the entire piece will cost you about 25 USD. hopefully this will help you out.

There is a easier way my friends. If you care about the stuff on your iTouch (E.g.: music, apps, games, videos, pictures) DO NOT PERFORM THIS. Since you said this is brand new, you should have no problem "jail-braking" (if that's even how you spell it) or even formatting it. Once you do this, everyhing will be erased on your iTouch and you can start brand new.

Well, i believe you have a 6th gen, slim 80gb iPod classic. If i am correct, iTunes 9.X (What ever version) should be able to work with it. When a red X appears on your iPod screen, espically the 6th gen classics, it is usually a harddrive failure. If it charges, you know it's not the battery. Try formatting it with windows then do a restore on it from iTunes. If that doesn't work, try giving it a good hand slap on the table( the sync port pointing down to the table). I know this might sound "barbaric, but the the needle in your harrdrive might have been displace and needs to be realigned. Also, the cable that connect your harddrive to your logic board might be slightly loose. This will help you connect. If all else fails, which i hope it doesn't, then i believe you should sell it on ebay or try and purchase a new harddrive. A harddrive for this model can be found on ifixit.com

It sounds like you will need a new click wheel in order to fix this problem. You can purchase one of theses off of ebay from a US seller for no more than 10 USD. 3rd Gen Click Wheel: http://cgi.ebay.com/iPod-3rd-Gen-Nano-clickwheel-ribbon-flex-cable-USA_W0QQitemZ350261078008QQcmdZViewItemQ...

What you might want to do is reset your iPod Touch and rename your device. Update your firmware as well. Make sure you as using the correct Firmware. And if all else fails, bring to a Apple Store and they might give you a free one if it still under warranty

Yes. Here's a video for you http://www.wonderhowto.com/how-to/video/how-to-take-apart-the-iphone-3g-for-repairs-216701/ I will try to make a video to show you how to completely break down the iPhone 3g to change the housing.

Your headphones port is completely separate from your speakers.What you will need to get is a IPHONE 3G RINGER PORT BUZZER SPEAKER ANTENNA FLEX PART. You want to get the whole assembly already done for you because it is hard to do it yourself if your a noob. You can find this on ebay. The part if you want in America is like a max of 25 USD and Foreign is about 15 USD max. LEt me know if this helps you out.