Answers

  • Answer to: How do you get a DVD out if your Eject button is broken?

    You can try holding option whilst booting, when the disc option comes up try to eject. If that doesn't work, you can try to knock it out by holding the macbook with the dvd slot facing the ground and then quickly moving the macbook up and down in a jerking motion ( this does work, just make sure you have a good grip ;) Good Luck

  • Answer to: Tool to plug in to an ethernet jack to sense whether it is active

    Something like this http://is.gd/4Yvek is probably a little more cost effective if it is just for hobby purposes - A Laptop would also suffice ;)

  • Answer to: Why does my Iphone think it has an accessory?

    rhutchis I suggest you crack it open and take a look, the corrosion should be relatively obvious. I am not 100% on your camera issue, it could be related but I am not sure.

  • Answer to: Why does my Iphone think it has an accessory?

    Sometimes these symptoms can occur from water damage to the dock connector area and/or corrosion in and around the dock connector from humidity/moisture. You can try to clean the dock connector with some alcohol on a cotton tip but this does not always work, your best option would be to examine the extent of internal corrosion and replace your dock connector.

  • Answer to: Why does my iphone keep restarting?

    You need to do a DFU Restore, 1. Connect the device to your computer 2. Shut down the device 3. Press the Power and the Home buttons at the same time 4. After 10 seconds release the Power button but continue holding the Home button until you see a popup from iTunes saying "iTunes has detected an iPhone in recovery mode" 5. If you have been successful your device screen will be completely black/blank (this is 'DFU Mode') 6. You can now proceed and restore to the latest firmware using iTunes This should fix your problem