PlayStation 3 Teardown

Teardown

Teardown

Teardowns provide a look inside a device and should not be used as disassembly instructions.

User-Contributed Guide

User-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

This is a teardown of an original launch 60GB PlayStation 3 system. One of the best units out there that had backwards compatibility and the card readers. Sadly this unit has a GPU a problem so it's broken.

Edit: Nickname fix, formerly Karasumachitose. Apologies to any inconvenience this causes.

Image #1 Image #2 Image #3

Add Note Edit Step 1 — PlayStation 3 Teardown  ¶ 

  • There she is, one of the two original PS3 models available at launch (60GB).

  • It's got PS2/PS1 backwards compatibility and a multi-card reader. The current PS3 Slim doesn't have the card reader. The other launch model lacked the card reader and WiFi (20GB).

Image #1 Image #2

Add Note Edit Step 2  ¶ 

  • Let's get started!

  • Remove the hard drive access cover from the bottom of the PS3.

Image #1

Add Note Edit Step 3  ¶ 

  • Use the Phillips screwdriver #1 to remove the blue screw.

Image #1 Image #2 Image #3

Add Note Edit Step 4  ¶ 

  • Lift up the metal lever.

  • Slide the hard drive towards the front of the case.

  • Pull it straight up and out of the unit.

    • This is all you need to do to access the PS3's hard drive.

Image #1 Image #2 Image #3

Add Note Edit Step 5  ¶ 

  • Remove the warranty sticker.

    • Obviously this voids your warranty. You have been warned.

  • Use your fingers and pry up and remove the foot underneath the sticker.

Image #1 Image #2

Add Note Edit Step 6  ¶ 

  • Use the Torx Screwdriver (T8 or T10) to remove the torx screw from the space behind the rubber foot.

    • This screw has a security bit but most are able to remove it successfully with a normal Torx driver.

Image #1 Image #2 Image #3

Add Note Edit Step 7  ¶ 

  • Place PlayStation face up such that "PlayStation 3" is oriented so you can read it.

  • Place your palm on the PlayStation 3 logo and slide the plastic front cover towards you and off of the outer plastic shell. Set it aside.

Image #1 Image #2 Image #3

Add Note Edit Step 8  ¶ 

  • Remove the metal receiver that held the torx screw you just removed.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ In stock

Phillips #00 Screwdriver

$4.95 · 50+ In stock

Phillips #1 Screwdriver

$4.95 · 27 In stock

Phillips #2 Screwdriver

$4.95 · 5 In stock

T8 Torx Security Bit Screwdriver

$6.95 · 50+ In stock

Recommended Tools

Universal Drive Adaptor

$29.95 · 50+ In stock

iFixit Lock Pick Set

$29.95 · 13 In stock

Inspection Scope

$39.95 · 37 In stock

Frictionless Ratchet

$24.95 · 47 In stock

Portable Anti-Static Mat

$24.95 · 15 In stock

Popular Device Products

Comments Add Note Comments are offturn on