first image

Add Note Edit Step 9  ¶ 

  • Lastly, pry away the black frame that surrounds the keyboad of the device. This will unveil the sliding mechanism.

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 10  ¶ 

  • We removed the Cans (not a recommended step!!!) to see what IC's were on the board.

    • Check out the Block Diagram for full details!

first image

Add Note Edit Step 11  ¶ 

Next » « Previous

Popular Products

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Metal Spudger Set

$7.95 · 50+ in stock

Heat Gun

$24.95 · 50+ in stock

Kapton Tape

$9.95 · 50+ in stock

Notes Add Note Notes are offturn on