Click Image To Zoom

 
 
 
 
 
 

Phillips #0 Screwdriver

$4.95

Product code: IF145-005

Product Overview

Zero to Hero

  • The #0 size of the Phillips bit is the smallest "standard" size of Phillips screwdriver (of course Phillips #00 and Phillips #000 are smaller).
  • Great for laptops, desktops, game consoles, and much more.

This size bit is also available in our popular 54 Bit Driver Kit & 26 Bit Driver Kit, carefully designed to include the most common and often hard to find driver bits used in electronics repair. This driver is also a part of our Pro Tech Screwdriver Set.

Product Details

$4.95 Economy

 
 
 

Condition:

New

Warranty:

6 month warranty

Notes:

Great quality driver. Gets the job done just fine for the average Joe and semi-pros.

$5.95 iFixit

 
 

Condition:

New

Warranty:

One year warranty

Notes:

Excellent quality driver that is built to last. Rubber handle with steel shaft and swivel top. A staff favorite!

$8.95 Pro / ESD / USA

 
 

Condition:

New

Warranty:

Lifetime Manufacturer Warranty

Notes:

Top of the line professional made in USA driver with swivel top ESD safe ergonomic handle.

Lifetime Warranty.

Add to Cart »
 

Stories

My Problem

My Ipad Retina had a battery that would last only 2 hours. I was not sure if this was standard so I did nothing for the warranty period. On about the 14th month I tried to get it repaired under warranty, only to be told it was going to cost me $370. That's a smidgen under new price. So I decided to try and replace the battery myself.

My Fix

Not good I smashed the screen. I did get the battery installed OK. I'm in the process of ordering a new screen

My Advice

Take your time on the screen. No matter what be patient. Use the guitar picks like the instructions say. I didn't because I didn't have any and I now have a smashed screen to show for it.

My Problem

Extrem langsames Raid 1 bei defekter Originalfestplatte.

So habe ich den Entschluss gefasst, den Server mit 2 1TB Hybridplatten von Seagate und um weitere 4 GB Ram, also von 2 x 2 auf 2 x 4, aufzurüsten.

My Fix

Zu Empfehlen sind hierzu die iFixit-Anleitungen zum Austausch der Festplatte, des Lüfters und der Speichersteine. Da der Miniserver kein DVD-Laufwerk hat, aber 2 Festplatten, schaut man nach Abheben der Verkleidung direkt auf die erste Festplatte. Benutzt wurden zur Reparatur 2 Thin Putty Knifes, ein Phillips #0 Schraubenzieher und ein wertvoller Spudger, mit dem sich vorsichtig Isolierbänder, Leitungsbänder und Festplattenwärmefühler lösen ließen. Der Festplattenwärmefühler der oberen Festplatte klebt an der Platte und behält auch später noch seine Klebefunktion, wenn man ihn vorsichtig mit dem Spudger abhebelt. Der Fühler der unteren Platte ist Teil des Festplattensteckboards, welches ebenfalls vorsichtig entfernt werden muss. Zum Lösen der Verschraubung der unteren Festplatte muss auch der Lüfter entfernt werden, um alle Festplattenschrauben zu erreichen. Bei allen Manipulationen bitte darauf achten, dass die Antennenkabel, vor allem beim Zusammenbau, nirgendwo gequetscht werden.

Bis auf den erfolgreichen Einbau der beiden 4GB Speicherelemente, hat alles sehr gut funktioniert. Jedoch weigert sich mein Miniserver zu booten, sobald beide 4GB Speichersteine eingebaut sind. Dieses Problem wird zur Zeit noch diskutiert. Bisher sieht es wohl so aus, dass auch die iFixit-Speicherelemente im konkreten Fall nicht kompatibel sind. Ein erneuter Versuch mit immer wieder empfohlenen RAMs von Crucial wird folgen. Ein in diesem Zusammenhang empfohlenes EFI-Update auf die Version 1.2 geht ins Leere, da die letzte EFI-Version des besagten Servers bereits höherwertiger als 1.2 ist und damit grundsätzlich wohl bereits 8 GB RAM ermöglicht.

Wir werden sehen!

Auf jeden Fall hat es mir Spaß gemacht, das Gerät mal komplett zu zerlegen. Außerdem konnte es so auch einmal mittels eines weichen Pinsels von allem Staub befreit werden. Die neuen Festplatten von WD haben eine Betriebstemperatur von 37 bis 46 °C, je nach Auslastung und arbeiten natürlich erheblich schneller. Die alten, m.E. minderwertigen, Originalplatten von Hitachi backten regelmäßig um die 60 °C, was wohl auch zum Abrauchen geführt haben dürfte.

Bei allen Manipulationen sind dünne Gummihandschuhe, wie sie in der Medizin üblich sind, sehr hilfreich, um elektrostatische Entladungen zu vermeiden, wodurch die Elektronikelemente Schaden nehmen können.

My Advice

Nur Mut!

Nicht gleich alles zur teueren Reparatur geben oder gar wegwerfen!

My Problem

I have a MacBook Core 2 duo A1181 black case MacBook. After checking online, I found iFixit, described the problem and determined it was likely the inverter cable or the display data cable.

My Fix

Many thanks to Matt Barnes of tech support who helped me pinpoint the problem - the inverter cable. Ordered that plus a spudger & a Phillips #0 screwdriver. With a tech minded friend, we fixed it in about 2+ hours. Your repair guides and photos were a huge help and without them the repair would have been really difficult.

My Advice

Take your time! Read the directions! Know what part goes back where. This is particularly true with fasteners. (they run away, you know!) In my case, there were many of them and some really small and easy to lose.

My Problem

I have a MacBook Core 2 duo A1181 black case MacBook. After checking online, I found iFixit, described the problem and determined it was likely the inverter cable or the display data cable.

My Fix

Many thanks to Matt Barnes of tech support who helped me pinpoint the problem - the inverter cable. Ordered that plus a spudger & a Phillips #0 screwdriver. With a tech minded friend, we fixed it in about 2+ hours. Your repair guides and photos were a huge help and without them the repair would have been really difficult.

My Advice

Take your time! Read the directions! Know what part goes back where. This is particularly true with fasteners. (they run away, you know!) In my case, there were many of them and some really small and easy to lose.

My Problem

My MacBook Pro battery had a Service Battery error and I needed to replace the battery... or else I would have been stuck using my laptop with the MagSafe power cord while having the risk of everything shutting down if the cord were to be pulled.

My Fix

It took me about 15 minutes or so. The instructions were super easy to follow, both visually and textually. I couldn't complain.

My Advice

If you don't have the tools available, definitely purchase the appropriate tools as suggested with the battery.

My Problem

My MacBook Pro battery was down to 55% of it's original battery capacity. iFixIt had a great tutorial on replacing it which had links to all the correct tools I needed to do the job. Well done!

My Fix

Was very easy once I had the three tools their tutorial called for.

My Advice

The correct screwdrivers assures the screws turn out and back in correctly and that there's no stripped screws.

My Problem

I was having trouble syncing and charging my iPhone 4 because the cable would not click into place when I would attempt to attach it to the dock connector.

My Fix

For the most part the repair/replacement process went smoothly but I ended up having to disassemble and reassemble the phone 3 times because I forgot to reconnect or didn't properly reconnect the WiFi cable and the home button on the first or second attempt.

My Advice

Read the instructions carefully. There are adhesive strips on the replacement dock connector that need to be removed when installing it.

The tweezers were extremely helpful when it came time to reassemble my iPhone.

My Problem

I bought a new iPhone 5 because the battery of my old iPhone 3G was out of order. Later I found the iFix from the web wia Google and decided to fix the older iPhone by myself.

Now I have two iPhones, iPhone 5 as the work phone and iPhone 3G for my personal use. Now I need not to receive the work emails during my vacations. After two weeks I shall leave the iPhone 5 at my office and travel to London for vacation with the older iPhone.

My Fix

The repairing was rather straightforward because of the proper tools and very clear guide. Removing the connector 3 was the only difficult part. Perhaps a magnified picture would be needed. Luckily I did not break the connector. It was very near.

My Advice

Be careful with connector 3. The tab that must be lifted the opposite side as the ribbon cable.

My Problem

i had to replace the battery in my macbook and realized that the tools needed were different than your typical screwdriver. Someone at work referred me to your website to order the tools.

My Fix

the repair went great. The order was placed and I received the tools within a few days. Went wonderfully!!!!

My Advice

THis is a great place to order tools - very reasonably priced and prompt delivery. This site needs to be advertised more !!!! I'm sure others could use the products!

pshilaire's Story Photo #257632

My Problem

I Needed more space on my macbook pro's hard drive...

My Fix

Very well ! Everything was done in 30 min !

My Advice

No particular advice.... The steps are very easy to follow.....