Click Image To Zoom

 
 

iPad Wi-Fi/3G Battery

$49.95

Product code: IF180-004-1

Compatibility

  • All 1st Gen iPads

Product Details

  • Power Rating: 6600 mAh
  • Model Number: A1315
  • Voltage: 3.7 V

  $49.95

 
 

Condition:

New

Warranty:

6 month warranty

Add to Cart »

13 Available

Quantity:

 

Replacement Guides

iPad 3G

Difficulty: Moderate

iPad Wi-Fi

Difficulty: Moderate

 

Compatibility

iPad 3G
16 GB
32 GB
64 GB
iPad Wi-Fi
16 GB
32 GB
64 GB
 

Stories

My Problem

One day the iPad stopped working. Would not turn on or initialize no matter what buttons you pressed. Wouldn't even go into recovery mode. All I got was the Apple logo randomly flashing and only when it was plugged in to a power outlet. Apple suspected the battery and offered their out of warranty $100 swap for a like iPad but loss of data. Needed that data. The solution was buy a replacement battery and try my hand at a tear down.

My Fix

The ifixit repair "how-to" guides are perfect. Go through them several times before you even get started. Follow the guide, read the cautions, get the tools. If you don't understand a process, take a CLOSE look at whats involved and figure it out.

From start to finish I took three hours (very slow and cautious) and the iPad works like new.

My Advice

1. Get the tools! The right tools make everything easier. Get extra plastic opening tools. They break rather than your devise (which you want) if you use too much force.

2. IMPORTANT! Buy extra metal clips that hold the screen in place. Unless your a magician, they will break. I broke 5 without even trying. You may not need them to reassemble, but if you want that clean like new fit, they need to be replaced.

3. The compoments inside the iPad have many tiny spacer/pads all over the place to keep parts from rubbing together and for a proper fit. They come off easily. Try to reinstall them if you know where they belong.

4. If the SIM board is not in the way of your battery don't bother removing it from the inside of the case. You'll see when you get there.

5. The SIM board connector on my iPad had fine electrical tape wrapped around the connector. This tape has to be unwrapped before you can remove it from the socket on the logic board.

My Problem

G DAY,Thanks for your concern, with myself and a tool kit like that,so many tools in such a small package!!Well I broke every second clip Holding the screen in,I followed the utube movie on how its supposed to be done,"They make look so easy"and dont show the reverse process.But,but, But I actually got my ipad apart and back together.It still dosnt work but i have plenty of time,and i know what im doing.Bloody great tool kit Thanks,Regards Mick DunnDEE

My Fix

DISASTER

My Advice

Definetly NONE at this stage

My Problem

Ipad 1 battery life was terrible! Replaced battery and FIXED!!!

My Fix

LEGENDARY! Took bait longer than expect the ordered T5 torn screwdriver sucked on the smaller bolts! Use T4 screwdriver bought from the source which was a great investment!

My Advice

Bad part of the process was the metallic holding clips snapped off but some still held! and could hold the LCD screen still in place which was good! warning that this process will scratch the edge of your iPad between the screen and metallic casing but everything else is good!