iPod Nano 2nd Gen. Disassembly: Installing Bottom Bezel Bracket - Removing Bottom Bezel Bracket (page 2/3)

iPod Nano 2nd Gen. Fixit Guide :: Installing Bottom Bezel Bracket (page 2/3)	prev \| contents \| next
iFixit sells iPod parts and accessories	Now Removing Bottom Bezel Bracket

click image to enlarge	Bottom Bezel Bracket (product details: IF199-006) Remove the following two screws: One #00 Phillips screw with a large head near the headphone jack. One #00 Phillips screw with a smaller head near the side of the iPod. This screw strips easily, so be sure to press down firmly on the screwdriver.
	Use a metal spudger to carefully pry the headphone jack out of the casing. DO NOT remove the headphone jack from the iPod entirely, as it is connected via a fragile ribbon connector to the click wheel.
	Slide the headphone jack out until the white plastic housing is no longer held in place by the metal casing.