iPod Nano 2nd Gen. Disassembly: Installing Battery

iPod Nano 2nd Gen. Fixit Guide :: Installing Battery (page 6/8)	prev \| contents \| next
iFixit sells iPod parts and accessories	Now Removing Battery

click image to enlarge	Battery (product details: IF199-003) Use a spudger to scrape away the black glue covering the three battery wires.
	Peel up the orange tape covering the three solder points on the other side of the logic board.
	Place the desoldering wick on top of the existing solder ball. Place the soldering iron on top of wick above the existing solder ball. Hold the soldering iron in place until the solder melts into the wick. Repeat the same procedure on the remaining two connectors.