iPod Nano 1st Gen. Disassembly: Installing Display - Removing Battery & Logic Board (page 3/8)

iPod Nano 1st Gen. Fixit Guide :: Installing Display (page 3/8)	prev \| contents \| next
iFixit sells iPod parts and accessories	Now Removing Battery & Logic Board

click image to enlarge	Battery & Logic Board (product details: 2 GB: IF197-003 4 GB: IF197-010) Remove the following 3 screws: Two 3 mm Phillips screws near the dock connector. One 4 mm Phillips screw along the edge of the logic board.
	Peel up the ground strap connecting the battery to the logic board.
	Rotate the battery out of the iPod and lay it next to the iPod. The battery is still soldered to the logic board by three wires, so don't remove it entirely.