Step 37
Use a spudger to lift the click wheel cable off the logic board. Be careful not to bend the cable too much, or the electronics on the cable could be damaged.
When reinstalling the clickwheel, make sure that the click wheel cable is pushed all the way into its connector.
Step 38
Slide the click wheel cable out of its connector.
Lift the click wheel assembly away from the logic board.
Don't forget the click wheel button when putting your iPod back together.
Step 39
Use a spudger to flip up the plastic tab holding the orange hard drive ribbon in place. The tab will rotate up 90 degrees, releasing the ribbon cable.