← prev | next →

Page 5 of 7

first image

Step 13

  • Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.


first image

Step 14

  • Like the hard drive connector, for the following step, you only need to move the connector about 2 mm. Pushing too hard or too far will damage the connector.

  • Loosen the touch wheel connector by pulling the brown locking bar toward the side of the iPod using the tips of your fingers.


first image

Step 15

  • Reove the 8 T6 Torx screws from the logic board.


← prev | next →

Page 5 of 7