iPod 1st Generation Disassembly: Installing Logic Board

iPod 1st Generation Fixit Guide :: Installing Logic Board (page 4/7)	prev \| contents \| next
iFixit sells iPod parts and accessories	Now Removing Display

click image to enlarge	Display (product details: IF190-003) Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.
	Peel up the gray rubber bumper near the hard drive ribbon to reveal the T6 Torx screw beneath. Remove the newly revealed T6 Torx screw.
	Remove the remaining 3 T6 Torx screws from the logic board.