iPhone Disassembly: Installing Headphone Jack - Removing Headphone Jack (page 4/8)

Getting the iPhone open is a challenging feat, so don't get discouraged. Take a deep breath and make sure you have plenty of time to get the job done.
Begin the process of removing the rear panel on the side without buttons. As the first side of the case is more difficult to free, this will help prevent any damage to the buttons or the surrounding case.
Insert the pointed end of a heavy-duty spudger into the space between the gray metal bar and the rear panel. Pry the panel up enough until you can get the tip of the iPod opening tool into the seam between the front bezel and rear panel.

iPhone Fixit Guide :: Installing Headphone Jack (page 4/8)	prev \| contents \| next
iFixit sells iPhone parts and accessories	Now Removing Headphone Jack

click image to enlarge	Headphone Jack (product details: IF105-001) Remove the three Phillips #00 screws securing the rear panel to the iPhone.
	Getting the iPhone open is a challenging feat, so don't get discouraged. Take a deep breath and make sure you have plenty of time to get the job done. Begin the process of removing the rear panel on the side without buttons. As the first side of the case is more difficult to free, this will help prevent any damage to the buttons or the surrounding case. Insert the pointed end of a heavy-duty spudger into the space between the gray metal bar and the rear panel. Pry the panel up enough until you can get the tip of the iPod opening tool into the seam between the front bezel and rear panel.
	Slide the iPod opening tool along the edge of the case, releasing the four tabs. Once you've freed the side of the case, be sure not to accidentally snap the case back together.