iPad 2 CDMA Headphone Jack Assembly Replacement
Please note that this guide is only a prerequisite for other guides.
- Author: Phillip Takahashi
- Difficulty: Moderate
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.
Be sure you are prying up on the hinged retaining flap, not the socket itself.
Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.
Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.
Comments Comments are onturn off