Image #1

Add Note Edit Step 25  ¶ 

  • Remove the two T8 Torx pins from the side of the hard drive.

Image #1

Add Note Edit Step 26  ¶ 

  • Use the flat end of a spudger to pry the hard drive thermal sensor off the adhesive securing it to the hard drive.

Next » « Previous

Required Tools

T8 Torx Security Bit Screwdriver

$6.95 · 45 In stock

T6 Torx Screwdriver

$4.95 · 20 In stock

Phillips #1 Screwdriver

$4.95 · 5 In stock

T10 Torx Security Bit Screwdriver

$6.95 · 30 In stock

Plastic Cards

$2.95 · 28 In stock

Related Products

1 TB 7200 RPM 3.5" Hard Drive

$109.95 · 6 In stock

Universal Drive Adapter

$29.95 · 50+ In stock

Recommended Tools

Universal Drive Adapter

$29.95 · 50+ In stock

Inspection Scope

$39.95 · 18 In stock

Frictionless Ratchet

$24.95 · 2 In stock

Portable Anti-Static Mat

$24.95 · 17 In stock

Comments Add Note Comments are offturn on