iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement
- Author: Andrew Bookholt
- Difficulty: Difficult
Remove your rear display bezel to access your display's internals.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.
Comments Comments are onturn off