Changes to revision 88345:

Edit by Chad:

Deleted
Added
Unchanged

Changes to text

[* black] We had to take care of one more Phillips screw at the bottom, and one near the headphone jack.
[* black] Unplug the two ribbon-cable connectors at the bottom of the phonephone and one at the battery compartment.
[* black] Note the rubber hole-to-mic sound conduit beneath the logic board. It will probably impede sliding some. Take it off first if you can.
[* black] Unplug the two ribbon-cable connectors at the bottom of the phonephone and one at the battery compartment.
[* black] Note the rubber hole-to-mic sound conduit beneath the logic board. It will probably impede sliding some. Take it off first if you can.
[* black] After that, the logic board assembly slowly-but-surely slid out from the rest of the phone.