History: Installing iBook G4 12" 800 MHz-1.2 GHz Top Shield
Edit by iRobot: (accepted )
Intro
| Field | Before | After |
|---|---|---|
| Device |
G4 |
G4 |
| Introduction | | |
| Difficulty | 4 | 4 |
| Conclusion | 1 | 1 |
| Imageid | 565 | 565 |
Guide Prerequisites
#1 was
empty but is now
Installing iBook G4 12" 800 MHz-1.2 GHz Battery
.
#2 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Keyboard .
#3 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Lower Case .
#4 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Bottom Shield .
#5 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz DC-In Board .
#6 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Upper Case .
#2 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Keyboard .
#3 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Lower Case .
#4 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Bottom Shield .
#5 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz DC-In Board .
#6 was empty but is now Installing iBook G4 12" 800 MHz-1.2 GHz Upper Case .
Tools
- Coin x1 added.
- Phillips #00 Screwdriver x1 added.
- Spudger x1 added.
- T8 Torx Screwdriver x1 added.
Parts
- IF183-015 x1 added.
Steps
| Before | After | |
|---|---|---|
| 1 |  | |
| 2 |  |