Help

delete step | insert step Editing step 6

Step Type:

Drag to rearrange

If present, peel the piece of black tape covering the hidden screw near the power button.

Remove the 2.6 mm Phillips screw securing the logic board near the power button.

(Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)

Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.

Your contributions are licensed under the open source Creative Commons license.