We encountered an error while trying to save the changes. We've made a note of it, and we'll fix the problem as soon as possible.
Remove the three large-headed 1.5 mm Phillips screws along the SIM card side of the iPhone.
Keep track of the washers under each of the screws.
Tip: It can be tricky, but it is also possible to just loosen the large-headed 1.5 mm Phillips screws slightly, without having to remove and replace the screw-and-washer set.
Remove the small-headed 1.5 mm Phillips screw near the rear camera.
Your contributions are licensed under the open source Creative Commons license.