Help

delete step | insert step Editing step 3

Step Type:

Drag to rearrange

Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.

Lift the clutch cover out of the display assembly.

During reassembly, make sure not to pinch the backlight cable (with the white connector) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)

Your contributions are licensed under the open source Creative Commons license.