Logic Board

1. Remove battery

2. Remove wrist lanyard

3. Remove screws on bottom of case

4. Remove screws on each side of the case

5. Remove front of casing

6. Remove screw on side of camera near the screen

7. Remove back of casing

8. Remove L-shaped piece on the bottom corner

9. Unplug connectors on side of LCD screen, remove screen

10. Lift tan ribbon from right hand side of back of camera out of the way

11. Remove screws in the metal faceplate and remove the faceplate

12. Remove tan ribbon cable from step 10

13. Remove ribbons that were underneath the faceplate

14. Unscrew logic board screws, remove logic board