Fix Your Stuff Community Store

USB 1020 Water Pump of DC 3.5-9V Replacement

Introduction

It's time to change your water fountain's pump! Having to change your pump could be due to a buildup of debris or it operating irregularly. Don't fret, this guide will walk you through how to replace the water pump in your indoor fountain without any trouble.

The specific model we'll be working with is the USB 1020, which operates on a voltage range of 3.5-9V.

Whether you're an experienced fountain tinkerer or a newbie to repairing aesthetic home items, these instructions suit all levels of expertise. By the end of this guide, your indoor fountain will be flowing smoothly once more.

What you need

  1. USB 1020 Water Pump of DC 3.5-9V Replacement, USB 1020 Water Pump of DC 3.5-9V: step 1, image 1 of 2 USB 1020 Water Pump of DC 3.5-9V Replacement, USB 1020 Water Pump of DC 3.5-9V: step 1, image 2 of 2

    • Unplug the USB-C cord from the fountain.

    • Only proceed with dry hands to prevent being electrocuted.

    Edit

  2. USB 1020 Water Pump of DC 3.5-9V Replacement: step 2, image 1 of 3 USB 1020 Water Pump of DC 3.5-9V Replacement: step 2, image 2 of 3 USB 1020 Water Pump of DC 3.5-9V Replacement: step 2, image 3 of 3

    • Carefully pull out the water pump by pulling the wire from the reservoir located at the back.

    Edit

  3. USB 1020 Water Pump of DC 3.5-9V Replacement: step 3, image 1 of 2 USB 1020 Water Pump of DC 3.5-9V Replacement: step 3, image 2 of 2

    • Detach the old water pump from the tube by gently pulling on the pump.

    Edit

  5. USB 1020 Water Pump of DC 3.5-9V Replacement: step 4, image 1 of 1

    • Adjust the water pressure and flow on the new water pump.

    • Shift switch to the right to lower the pressure and left to increase the pressure.

    Edit

  6. USB 1020 Water Pump of DC 3.5-9V Replacement: step 5, image 1 of 3 USB 1020 Water Pump of DC 3.5-9V Replacement: step 5, image 2 of 3 USB 1020 Water Pump of DC 3.5-9V Replacement: step 5, image 3 of 3

    • Connect the new water pump to the tube.

    • Make sure you hear a click sound to ensure the connection is secure.

    Edit

  7. USB 1020 Water Pump of DC 3.5-9V Replacement: step 6, image 1 of 1

    • Place the new water pump into the reservoir.

    Edit

  8. USB 1020 Water Pump of DC 3.5-9V Replacement: step 7, image 1 of 2 USB 1020 Water Pump of DC 3.5-9V Replacement: step 7, image 2 of 2

    • Plug in the USB-C cord to turn on the fountain.

    • Use dry hands to prevent being electrocuted.

    Edit
Conclusion

With these easy-to-follow steps, you can seamlessly replace the water pump in your indoor fountain to keep it in excellent working condition.

Author

with 1 other contributor

Guneet Longia

Member since: 01/30/23

153 Reputation

1 Guide authored

Badges: 3

Team

York University, Team D-17, O'Regan Fall 2023 Member of York University, Team D-17, O'Regan Fall 2023

YORK-O'REGAN-F23SDG17

1 Member

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 20

All Time: 101