Introduction
Is your Tribit Xsound Go speaker sounding grainy or low? The water, dirt, or even rust may cause a replacement for the speaker driver for a much clear and transparent sound. The following steps are easy to follow.
What you need
-
-
Insert a spudger in the seam between the front speaker grill and chassis.
-
Pry around the perimeter until the front grill releases.
-
Remove the front grill.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 3-3, Coppersmith Fall 2023 Member of University of North Texas, Team 3-3, Coppersmith Fall 2023
UNT-COPPERSMITH-F23S3G3
4 Members
3 Guides authored
