Introduction
This guide will pictorially show you how to detect an age failed pump strainer cover o-ring. Replacing actual o-ring is very trivial so that won't be shown.
-
-
Bubbles visible in strainer chamber (or at outlet jets)? Bend oring at extreme angle as shown. If tiny fissures are apparent as in photo a new o-ring will solve the issue.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
