Skateboard Hanger Replacement

Introduction

Is your skateboard veering off in the wrong direction or are you not going in a straight path? Then it’s time to replace the hanger of your skateboard. This guide will teach you how to disassemble & replace a skateboard hanger if it's damaged or broken.

What you need

Step 1 Hanger

Skateboard Hanger Replacement, Hanger: step 1, image 1 of 2

Skateboard Hanger Replacement, Hanger: step 1, image 2 of 2

Using the T-tool, unscrew the nut securing the wheel and remove it, setting it and the wheel aside.

Edit

Step 2

Skateboard Hanger Replacement: step 2, image 3 of 3

Using the T-Tool, unscrew the Kingpin nut, washer and top bushing so that the hanger itself can be taken off.

Edit

Step 3

Pull straight up to remove the hanger. Remove the lower bushing and the lower cup washer just to check on the riser.

Edit

Step 4

To reassemble, take the lower cup washer, then the lower bushing and put it on the kingpin. Next, set the replacement hanger on top of the lower bushing.

Edit