Sega Dreamcast Expansion Bay Replacement

Student-Created Guide

Student-Created Guide

An awesome student from our education program made this guide. It is not managed by iFixit staff.

  • Author: wkwong
  • Time required: 30 seconds
  • Difficulty: Very easy

A guide to remove the expansion bay from the Sega Dreamcast.

Image #1

Edit Step 1 Expansion Bay  ¶ 

  • Verify that the console is disconnected from the AC outlet before you begin.

  • Flip the console over on its back.

  • Take note of your model number, in case replacement parts are needed.

Image #1

Edit Step 2  ¶ 

  • Remove the expansion bay by applying pressure to the small clip on the expansion bay while prying it away from the console.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Sega Dreamcast device page.

Popular Products

500 GB 5400 RPM 2.5" Hard Drive

$74.95 · 9 In stock

Small Suction Cup

$2.95 · 50+ In stock

Anti-Static Mat

$24.95 · 50+ In stock

TR10 Torx Security Screwdriver

$4.95 · 50+ In stock

Polyimide Tape

$9.95 · 50+ In stock

Comments Comments are onturn off

No comments.

View Statistics:

Today: 0

This Week: 0

This Month: 32

All Time: 6,965