Repairing Motorola Moto Q Back Casing
An awesome member of our community made this guide. It is not managed by iFixit staff.
- Author: Luis Herrera
- Time required: 15 minutes
- Difficulty: Easy
This guide will show you step-by-step how to replace the back casing.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Wedge the plastic opening tool in between the top and bottom cases. This may require a little or a lot of force so be careful.
Note: the phone should be face up and the plastic opening tool should be face downwards
Once you get the plastic opening tool in, slide it across the side of the phone, making sure to keep the plastic opening tool wedged in between the two casings.
Repeat the 3 steps above for the top, bottom, and opposite side.
Comments Comments are onturn off