Repairing Canon PowerShot SD450 Casing
This guide needs better markups. Help out by correcting or making some markup annotations.
This guide is missing information on how to start the process. Make a prerequisite guide!
An awesome member of our community made this guide. It is not managed by iFixit staff.
- Author: Curtis Wagner
- Time required: 5 minutes
- Difficulty: Easy
You need to remove the casing before you can start getting into any internal parts of the Camera. This can also be a good start to helping the camera dry out in case of a water accident.
Embed this guide
With the HTML code below, you can embed this guide as a small widget on your website.
Find the line that separates the casing into its two halves. Hold each half seperately, and gently pull apart.
Note that there is a small metal clip holding the two halves together. It might help to press down on the back half (indicated) while pulling upward slightly on the front half.
Comments Comments are onturn off