Installing iPod Shuffle 1st Generation Hold Switch

Add Note Introduction

The plastic hold switch.

Tools used in this guide
Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Hold Switch

  • Before opening your iPod, ensure that the hold switch is in the locked position.

first image

Add Note Step 2

  • Use a spudger to pry up the white plastic hold switch.

Congratulations!

Share your repair story!

  

To reassemble your device, follow these instructions in reverse order. For more information, check out the iPod Shuffle 1st Generation device page.

Did you successfully follow this guide?

Notes

There are no notes