first image

Add Note Edit Step 4  ¶ 

  • Insert a small iPod opening tool into the seam on the Hold button side of the iPod, with the edge of the tool pointing toward the rear panel.

first image

Add Note Edit Step 5  ¶ 

  • The large iPod opening tool is no longer needed to gain access to the left side of the iPod.

  • Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the two tabs attached to the rear case, pushing the clips toward the center of the iPod until both have been freed.

first image
thumb image 1
thumb image 2
thumb image 3

Add Note Edit Step 6  ¶ 

  • Repeat the same procedure listed in the previous step to free the five clips along the headphone jack side of the iPod.

Next » « Previous

Required Tools

Plastic Opening Tools

$2.95 · 50+ in stock

Related Products

iPod Nano Gen 1 Rear Panel

$19.95 · 29 in stock

Notes Add Note Notes are offturn on