first image

Add Note Step 16

  • Use a spudger to slide the click wheel ribbon out of its connector.

first image

Add Note Step 17

  • The logic board and battery are now free from the iPod.

Congratulations!

Share your repair story!

  

To reassemble your device, follow these instructions in reverse order. For more information, check out the iPod Nano 1st Generation device page.

Did you successfully follow this guide?

Add NoteNotes: Step 16

daisystanton's avatar
Flag Reply by daisystanton Aug 31 @ 7:55 PM

Don't do this unless you have to. Getting this ribbon back in is nearly impossible.

rsharich's avatar
Flag Reply by rsharich Sep 25 @ 11:17 AM

Quote from daisystanton:

Don't do this unless you have to. Getting this ribbon back in is nearly impossible.

Try using tweezers or medical clamps to reach in that tight spot. Use these tools to also connect the click wheel ribbon back to the logic board.

Mabrew's avatar
Flag Reply by Mabrew 3 days ago

yeah i just finished puting in a brand new display but it only goes white - no text or anything just white.

any tips?