first image

Add Note Edit Step 7 — Display  ¶ 

  • Be careful, this connector is fragile.

  • Use a spudger or the tip of your finger to carefully disconect the orange click wheel ribbon from the logic board.

first image

Add Note Edit Step 8  ¶ 

  • Remove the two #00 Phillips screws securing the headphone jack to the casing.

first image

Add Note Edit Step 9  ¶ 

  • Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.

  • Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.

Next » « Previous

Required Tools

Spudger

$2.95 · 50+ in stock

Phillips #00 Screwdriver

$4.95 · 50+ in stock

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 50+ in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Notes Add Note Notes are offturn on