Installing iPod 2nd Generation Rear Panel

  • Author: iRobot
  • Difficulty: Moderate
  • Add Note x
  • x 3

The shiny rear half of your iPod case.

Tools
Relevant parts
first image

Add Note Edit Step 1 — Rear Panel  ¶ 

  • Before opening your iPod, ensure that the hold switch is in the locked position.

first image

Add Note Edit Step 2  ¶ 

  • Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

  • Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you've inserted the tool, run it along the seam to free the five tabs holding the iPod together.

first image

Add Note Edit Step 3  ¶ 

  • Continue to run the opening tool along the side of the case until all five tabs have been released.

Next » « Previous

Required Tools

Plastic Opening Tools

$2.95 · 50+ in stock

Popular Products

Heavy-duty Spudger

$4.95 · 50+ in stock

Heavy-duty Suction Cups (Pair)

$14.95 · 50+ in stock

26 Bit Driver Kit

$14.95 · 50+ in stock

MacBook Pro Battery 5-Point Pentalobe Screwdriver

$12.95 · 50+ in stock

SIM Card Eject Tool

$2.95 · 50+ in stock

Notes Add Note Notes are offturn on