first image

Add Note Step 13

  • Use a spudger to gently pry the camera up and out of its housing in the rear panel. The camera cannot be removed entirely yet because it's connected to the bottom of the logic board.

first image

Add Note Step 14

  • Use a spudger to gently pry up the end of the logic board closest to the dock connector.

  • If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.

first image

Add Note Step 15

  • Slide the logic board towards the dock connector and out of the iPhone.

Notes

There are no notes