first image

Add Note Step 13

  • Pry up the rear panel by pulling the dental pick clockwise in a quick motion. Apply force perpendicular to the plane of the display assembly. You may be afraid to go fast, but going slowly is more likely to bend the case.

  • The rear panel is still attached to the iPhone by the headphone jack cable, so don't entirely remove the rear panel from the iPhone just yet.

first image

Add Note Step 14

  • Make sure the phone is off before disconnecting the headphone jack cable.

  • Use a spudger to disconnect the headphone jack cable from the logic board.

first image

Add Note Step 15 — Camera

  • Use a spudger to disconnect the camera connector.

Notes

There are no notes