Installing iPhone 1st Generation Battery

  • Author: iRobot
  • Difficulty: Very difficult
  • Add Note x
  • x 77

Battery not lasting long? Swap it out (requires soldering).

Sections
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — SIM Card  ¶ 

  • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

  • Press down on the paper clip until the SIM card tray pops out.

first image

Add Note Edit Step 2  ¶ 

  • Grasp the SIM card tray and slide it out of the iPhone.

first image

Add Note Edit Step 3 — Antenna Cover  ¶ 

  • This image shows the two tabs and two catches located on the underside of the antenna cover. The two tabs at the top of the image must be pushed towards the black cover to release them.

Next » « Previous

Comments Add Note Comments are offturn on