Steps 1–2: Battery
Steps 3–9: Keyboard
Steps 10–21: Lower Case
Steps 22–23: Bottom Shield
Steps 24–26: DC-In Board
Steps 27–32: Upper Case
Steps 33–34: Top Shield
Steps 35–37: Hard Drive
Steps 38–40: Hard Drive Replacement
Related parts
320 GB 5400 RPM Western Digital ATA Hard Drive (New)
$119.95 · 26 in stock
250 GB 5400 RPM Western Digital ATA Hard Drive (New)
$109.95 · 9 in stock
Related tools
Spudger
$2.95 · 302 in stock
Phillips #00 Screwdriver
$4.95 · 324 in stock
T8 Torx Screwdriver
$4.95 · 101 in stock
Flathead 3/32" Screwdriver
$4.95 · 71 in stock
Popular Repair Guides
Step 7
Remove the four silver Phillips screws that secure the RAM shield.
Step 8
Grasp the metal bracket on top of the RAM shield and pull upward to remove the shield.
Step 9
Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.
Make sure that you reconnect the keyboard cable before replacing the RAM shield.
Notes
There are no notes