Steps 1–2: Battery
Steps 3–9: Keyboard
Steps 10–21: Lower Case
Steps 22–23: Bottom Shield
Steps 24–26: DC-In Board
Steps 27–33: Upper Case
Steps 34–35: Top Shield
Steps 36–38: Modem
Steps 39–45: Heat Sink
Related parts
iBook G4 12" 1/1.2 GHz Heat Sink
$19.95 · 17 in stock
iBook G4 12" 800 MHz Heat Sink
$19.95 · 30 in stock
Related tools
Phillips #00 Screwdriver
$4.95 · 468 in stock
4mm Nut Driver
$4.95 · 22 in stock
Flathead 3/32" Screwdriver
$4.95 · 65 in stock
Spudger
$2.95 · 896 in stock
T8 Torx Screwdriver
$4.95 · 73 in stock
Popular Repair Guides
Step 4
If the computer has an AirPort card installed, follow the next three steps to remove it.
Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.
Step 5
Grasp the clear plastic tab on the AirPort card and pull toward the display.
Step 6
Hold the AirPort card in one hand and use your other hand to remove the antenna cable.
Notes
There are no notes