first image

Add Note Step 34 — Top Shield

  • Remove the following 15 screws:

    • Fourteen 3 mm Phillips.

    • One 5.5 mm Phillips in the upper left corner.

first image

Add Note Step 35

  • Lift the top shield up from the right side, minding the upper left corner, which may catch on the metal framework.

first image

Add Note Step 36 — Hard Drive

  • Lift the metal restraining bracket from the hard drive and place it aside.

Add NoteNotes: Step 34

chrisbulle's avatar
Flag Reply by chrisbulle Oct 29 @ 6:18 AM

This is very confusing. Next time I'm going to mark the spots where the little screws go with red sharpie.