Installing iBook G4 12" 800 MHz-1.2 GHz DC-In Board
Steps 1–2: Battery
Steps 3–14: Lower Case
Steps 15–16: Bottom Shield
Steps 17–19: DC-In Board
Related parts
iBook G4 12" DC-In Board
$29.95 · 39 in stock
Related tools
T8 Torx Screwdriver
$4.95 · 109 in stock
Spudger
$2.95 · 1540 in stock
Phillips #00 Screwdriver
$4.95 · 145 in stock
Popular Repair Guides
Installing iBook G4 12" 800 MHz-1.2 GHz DC-In Board
Introduction
| Difficulty: | Moderate |
|---|
Tripped over your power cord? At least you don't have to replace the entire logic board.
Tools used in this guide
Parts relevant to this guide
Step 1 — Battery
Use a coin to rotate the battery locking screw 90 degrees clockwise.
Step 2
Lift the battery out of the computer.
Step 3 — Lower Case
Use a pin (or anything you like) to remove the three rubber feet from the lower case.
Notes
There are no notes