first image

Add Note Edit Step 34 — Hard Drive  ¶ 

  • Remove the three 5 mm standoffs securing the hard drive to the logic board.

first image

Add Note Edit Step 35  ¶ 

  • Pull the hard drive cable up from the logic board, using the plastic loop.

  • Lift the hard drive, with metal bracket attached, from the logic board.

Next » « Previous

To reassemble your device, follow these instructions in reverse order.

For more information, check out the iBook G3 Clamshell device page.

Did you successfully follow this guide?

Required Tools

Phillips #0 Screwdriver

$4.95 · 50+ in stock

T8 Torx Security Bit Screwdriver

$6.95 · 48 in stock

5mm Nut Driver

$9.95 · 12 in stock

Flathead 3/32" or 2.5 mm Screwdriver

$4.95 · 50+ in stock

Coin

$2.95 · 16 in stock

Recommended Tools

Home Tech Toolkit

$24.95 · 50+ in stock

Sorting Tray

$7.95 · 50+ in stock

Anti-Static Wrist Strap

$7.95 · 13 in stock

Pro Tech Base Toolkit

$59.95 · 50+ in stock

Thirsty Bag

$6.95 · 50+ in stock

Popular Device Products

Notes Add Note Notes are offturn on