first image

Add Note Step 31

  • Deroute the speaker cable from the metal framework and disconnect it from the logic board.

first image

Add Note Step 32

  • There are six screws to remove (if you have an iBook without Firewire the screw circled in orange will not be present):

    • Two short, flat-headed Phillips screws near the battery compartment.

    • One short, round-headed Phillips near the speaker cable connector.

    • One short, flat-headed Phillips between the ethernet and USB ports.

    • One short, flat-headed Phillips to the left of the hole-y (polite laughter) area.

    • One long, round-headed Phillips screw near the power receptacle.

first image

Add Note Step 33

  • Lift the right side of the EMI shield up and pull it out of the computer.

Notes

There are no notes