Step 1: Battery
Steps 2–4: Airport Card
Steps 5–7: Keyboard
Steps 8–16: Upper Case
Steps 17–19: Optical Drive
Steps 20–23: Modem
Steps 24–28: Display
Steps 29–33: EMI Shield
Steps 34–35: Hard Drive
Related tools
T8 Torx Screwdriver
$4.95 · 74 in stock
Phillips #0 Screwdriver
$4.95 · 69 in stock
Flathead 3/32" Screwdriver
$4.95 · 66 in stock
5mm Nut Driver
$4.95 · 165 in stock
Popular Repair Guides
Step 28
Finally, support the display with one hand while unscrewing the last Phillips screw from the right hinge (push the display gently down to avoid putting pressure on the screw).
Remove the display assembly.
Step 29
—
EMI Shield
Remove the two small Phillips screws from the RJ-11 board.
Step 30
Push out the lower case rim and pull the RJ-11 board out of the computer.
Notes
There are no notes