Installing iBook G3 Clamshell CD Faceplate

  • Author: iRobot
  • Difficulty: Easy
  • Add Note x

Replace or change the CD drive faceplate.

Sections
Files
Tools
Tools (continued)
Relevant parts
first image

Add Note Edit Step 1 — Battery  ¶ 

  • Use a coin to turn both battery locking screws 90 degrees to the left.

  • Remove the battery cover.

  • Remove the battery from the computer by pulling up on the plastic tab.

first image

Add Note Edit Step 2 — CD Faceplate  ¶ 

  • Use a straightened paperclip to manually eject the CD-ROM tray.

first image

Add Note Edit Step 3  ¶ 

  • Remove the single black Phillips screw from the center of the CD-ROM bezel.

first image

Add Note Edit Step 4  ¶ 

  • Grasp the CD-ROM bezel and rotate it upward to remove it from the drive.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the iBook G3 Clamshell device page.

Did you successfully follow this guide?

Notes Add Note Notes are offturn on