View profile
Logout
« Previous
Page 20 of 20
Remove the single Phillips screw that secures the logic board to the metal framework and remove the metal shielding.
Peel back the foil tape securing the logic board to the RJ-11 jack.
Disconnect the reset button from the logic board. (this part is not present on later models)
Lift the metal framework up and off the logic board.
Now would be a good time to remove the battery connector and RAM from your (now) old logic board if you're planning to keep them.
Next » « Previous
To reassemble your device, follow these instructions in reverse order.
For more information, check out the iBook G3 14" device page.
Oops, I actually didn't do it.
I did it! Success!
$6.95 · 48 in stock
$7.95 · 13 in stock
$2.95 · 50+ in stock
$4.95 · 50+ in stock
$299.95
$24.95 · 50+ in stock
$7.95 · 50+ in stock
$59.95 · 50+ in stock
$6.95 · 50+ in stock
1024
Notes are offturn on