Step 1: Battery
Steps 2–8: Keyboard
Steps 9–19: Lower Case
Steps 20–27: Upper Case
Steps 28–29: Bottom Shield
Step 30: Fan
Steps 31–33: Top Shield
Steps 34–37: Modem
Steps 38–41: Hard Drive
Steps 42–43: IO Bezel
Steps 44–51: Display
Steps 52–59: Logic Board
Related parts
iBook G3 14" 800 MHz Logic Board
$299.95 · 0 in stock
Related tools
Spudger
$2.95 · 919 in stock
Anti-Static Wrist Strap
$2.95 · 103 in stock
Flathead 3/32" Screwdriver
$4.95 · 66 in stock
T8 Torx Screwdriver
$4.95 · 74 in stock
Phillips #00 Screwdriver
$4.95 · 481 in stock
Popular Repair Guides
Step 49
Disconnect the inverter cable from the logic board.
Carefully deroute the inverter cable from beneath the optical drive.
Step 50
Deroute the Airport antenna cable from beneath the optical drive.
Step 51
Support the display with your free hand removing the following screws.
Remove the single Phillips screw on the outer edge of either hinge (two screws total).
Tilt the display back to get over two small nubbins, and then slide it directly from the case and away.
Notes
There are no notes