Installing iBook G3 14" Bottom Shield

Add Note Introduction

The metallic bottom shield protects the logic board from electromagnetic interference.

Parts relevant to this guide

Paginated Single Page Steps

first image

Add Note Step 1 — Battery

  • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  • Lift the battery out of the computer.

first image

Add Note Step 2 — Lower Case

  • Use a pin (or anything you like) to remove the three rubber feet from the lower case.

first image

Add Note Step 3

  • Remove the three newly-revealed Phillips screws.

Notes

There are no notes